• +34 93 777 05 00
  • mcv@mcvsa.com
contact

PM1 head

Head for selecting particles smaller than 1 micron for 150 mm diameter filters

Característiques tècniques

  • Head designed under the specifications of European Standard EN14907.
  • Constructed of anodized aluminium.
  • Uses 150mm diameter filters.
  • Weight: 7,2 kg.

Aplicacions

  • Measurement of ultrafine particles, smaller than 1 μm.
  • For the capture of fine dust, combustion particles, bacteria and viruses.

Fabriquem, manteniment i reparació d'equips d’instrumentació mediambiental
CONTACTAR

Altres productes

Fabricació, manteniment i reparació d’equips d’instrumentació mediambiental.

TOTS ELS PRODUCTES
Sequential Low Volume Sampler for sampling up to 30 filters
Sequential Low Volume Sampler for gravimetric determination of the mass concentration of PM10 or PM2,5 of suspended particulate matter, with sample collection on a filter and determination in the laboratory.
Sequential high volume sampler for sampling up to 15 filters
Sequential high volume sampler for gravimetric determination of the mass concentration of PM10 or PM2,5 of suspended particulate matter, with sample collection on a filter and determination in the laboratory.
High-volume sampler for sampling a filter
High volume sampler with 1 filter for gravimetric determination of the mass concentration of PM10 or PM2,5 of suspended particulate matter, with sample collection on a filter and determination in the laboratory
Low volume sampler for sampling a filter
Low volume sampler with 1 filter for gravimetric determination of the mass concentration of PM10 or PM2,5 of suspended particulate matter, with sample collection on a filter and determination in the laboratory
Continuous particle monitor
Latest generation optical aerosol spectrometer with unique detection limit and excellent counting efficiency. Suitable for real-time monitoring of PM in any environmental condition and at all sites
Ultrafine particle counter
The 19" rack-mount CPC with a 10nm D50, fully compliant with EN16976, is designed for continuous (24/7) real-time monitoring of ultrafine particles (UFP) in ambient air
Ultrafine particle counter and sizer
The 19" rack-mount SMPS+C system, fully compliant with CEN/TS 17434:2020, is designed for continuous (24/7) real-time monitoring of ultrafine particles (UFP) in ambient air. Its functionality is based on electrostatic classification and condensation particle counting
Continuous Particle Monitor
The GRIMM EDM 180 is the leading system for measuring particle concentration (PM10, PM2,5) in ambient air
Rainwater sampler
Precipitation collector for collecting rain for chemical analysis. It is protected in a reinforced and thermally insulated cabinet to withstand adverse outdoor conditions and keep the sample in good condition
Sedimentable Particle Sampler
Sampler equipment for determining sedimentable particles present in the air and which are deposited by gravity inside the sample collection container
Contacte