• +34 93 777 05 00
  • mcv@mcvsa.com
contact

Small volume sampler for daily sampling with Temperature and Pressure sensor

Equipment for capturing SO2 and smoke in immission for daily sampling periods with temperature and pressure sensor.

Technical specifications

  • Sampler consisting of a bubbler with an inner tube and a brass filter holder for smoke retention.
  • Heating resistance for working in cold environments.
  • Equipped with a programmer clock for continuous or interval samples and a flow regulation key.
  • Suction flow rate: 40 to 150 l/h.
  • Possibility of double pump to reach a suction flow rate of 3 l/min.
  • Flow meter reading: from 00000.000 to 99999.999 m3.
  • Adjustable timer: from 1 to 24 hours at 15 min intervals.
  • 5cm Ø brass filter holder with 1″” stain diameter.
  • There is a variant for capturing NO2 and smoke.
  • Weight: 8 Kg.

Applications

  • Capture of SO2 or NO2 and smoke in immission.
  • Measurement of ambient air in locations where coal or fossil fuel combustion is present.
  • Metallurgy, and environments with vehicles or machinery that burn fuels with a high sulfur content.

We manufacture, maintain and repair environmental instrumentation equipment.
CONTACT

Other products

Manufacturing, maintenance and repair of environmental instrumentation equipment.

ALL PRODUCTS
Sequential Low Volume Sampler for sampling up to 30 filters
Sequential Low Volume Sampler for gravimetric determination of the mass concentration of PM10 or PM2,5 of suspended particulate matter, with sample collection on a filter and determination in the laboratory.
CAV-A/MSb
Sequential high volume sampler for sampling up to 15 filters
Sequential high volume sampler for gravimetric determination of the mass concentration of PM10 or PM2,5 of suspended particulate matter, with sample collection on a filter and determination in the laboratory.
CAV-A/Mb
High-volume sampler for sampling a filter
High volume sampler with 1 filter for gravimetric determination of the mass concentration of PM10 or PM2,5 of suspended particulate matter, with sample collection on a filter and determination in the laboratory
Low volume sampler for sampling a filter
Low volume sampler with 1 filter for gravimetric determination of the mass concentration of PM10 or PM2,5 of suspended particulate matter, with sample collection on a filter and determination in the laboratory
Continuous particle monitor
Latest generation optical aerosol spectrometer with unique detection limit and excellent counting efficiency. Suitable for real-time monitoring of PM in any environmental condition and at all sites
Ultrafine particle counter
The 19" rack-mount CPC with a 10nm D50, fully compliant with EN16976, is designed for continuous (24/7) real-time monitoring of ultrafine particles (UFP) in ambient air
Ultrafine particle counter and sizer
The 19" rack-mount SMPS+C system, fully compliant with CEN/TS 17434:2020, is designed for continuous (24/7) real-time monitoring of ultrafine particles (UFP) in ambient air. Its functionality is based on electrostatic classification and condensation particle counting
Continuous Particle Monitor
The GRIMM EDM 180 is the leading system for measuring particle concentration (PM10, PM2,5) in ambient air
Rainwater sampler
Precipitation collector for collecting rain for chemical analysis. It is protected in a reinforced and thermally insulated cabinet to withstand adverse outdoor conditions and keep the sample in good condition
Sedimentable Particle Sampler
Sampler equipment for determining sedimentable particles present in the air and which are deposited by gravity inside the sample collection container
Contacte