• +34 93 777 05 00
  • mcv@mcvsa.com
contact

Portable Dynamic Calibration System

Dynamic multipoint and multiparameter calibration system mounted in a transport case that allows the generation of calibration gas patterns from high concentration bottles, by zero air or Nitrogen dilution. Built-in ozone generator with photometer for measuring the ozone generated, with correction for pressure and temperature.

Technical specifications

  • Dilution ratio up to 5000:1.
  • Calibration gas output flow rates: from 0,2 lpm to 10 lpm.
  • Pneumatic circuit with:
  • 1 gas bottle entrance.
  • 1 zero air/nitrogen inlet.
  • 1 calibration gas outlets.
  • 1 vent outlet.
  • Gas inlets accept simple, compound or mixed gases.
  • All internal pipes, solenoid valves, fittings, chambers, etc., are made of stainless steel, glass or Teflon, suitable for corrosive gases.
  • Flow regulation: ±1% fe.
  • Extensive calibration program managed by a powerful microprocessor.
  • Allows programming of dilution ramps and calibration sequences, supporting up to a maximum of 16 programs and 4 sequences, being able to execute 8 different programs in each sequence.
  • Manual operation in local mode, pre-programmed automatic.
  • Easy programming via interactive menu presented on display and operated by 4 keys.
  • Weight: 21 Kg.

Applications

  • Multipoint and multiparameter calibration system used for the calibration of automatic atmospheric pollutant analysers.
  • Fundamental devices in measurement and control techniques to regulate, adjust and verify installations that have control instrumentation.
  • Gas phase titration of NO to NO2 that allows calibration of NO2 analysers from a NO bottle.

We manufacture, maintain and repair environmental instrumentation equipment.
CONTACT

Other products

Manufacturing, maintenance and repair of environmental instrumentation equipment.

ALL PRODUCTS
Sequential Low Volume Sampler for sampling up to 30 filters
Sequential Low Volume Sampler for gravimetric determination of the mass concentration of PM10 or PM2,5 of suspended particulate matter, with sample collection on a filter and determination in the laboratory.
CAV-A/MSb
Sequential high volume sampler for sampling up to 15 filters
Sequential high volume sampler for gravimetric determination of the mass concentration of PM10 or PM2,5 of suspended particulate matter, with sample collection on a filter and determination in the laboratory.
CAV-A/Mb
High-volume sampler for sampling a filter
High volume sampler with 1 filter for gravimetric determination of the mass concentration of PM10 or PM2,5 of suspended particulate matter, with sample collection on a filter and determination in the laboratory
Low volume sampler for sampling a filter
Low volume sampler with 1 filter for gravimetric determination of the mass concentration of PM10 or PM2,5 of suspended particulate matter, with sample collection on a filter and determination in the laboratory
Continuous particle monitor
Latest generation optical aerosol spectrometer with unique detection limit and excellent counting efficiency. Suitable for real-time monitoring of PM in any environmental condition and at all sites
Ultrafine particle counter
The 19" rack-mount CPC with a 10nm D50, fully compliant with EN16976, is designed for continuous (24/7) real-time monitoring of ultrafine particles (UFP) in ambient air
Ultrafine particle counter and sizer
The 19" rack-mount SMPS+C system, fully compliant with CEN/TS 17434:2020, is designed for continuous (24/7) real-time monitoring of ultrafine particles (UFP) in ambient air. Its functionality is based on electrostatic classification and condensation particle counting
Continuous Particle Monitor
The GRIMM EDM 180 is the leading system for measuring particle concentration (PM10, PM2,5) in ambient air
Rainwater sampler
Precipitation collector for collecting rain for chemical analysis. It is protected in a reinforced and thermally insulated cabinet to withstand adverse outdoor conditions and keep the sample in good condition
Sedimentable Particle Sampler
Sampler equipment for determining sedimentable particles present in the air and which are deposited by gravity inside the sample collection container
Contacte