• +34 93 777 05 00
  • mcv@mcvsa.com
contact

Ultrafine particle counter

The 19″ rack-mount CPC with a 10nm D50, fully compliant with EN16976, is designed for continuous (24/7) real-time monitoring of ultrafine particles (UFP) in ambient air.

Technical specifications

  • Detection principle: Condensation particle counter.
  • Working fluid: n-butanol (n-butyl alcohol).
  • Particle concentration range:
  • Single counting mode: Up to 150.000 particles/cm³.
  • Photometric mode: Up to 10⁷ particles/cm³.
  • Concentration accuracy:
  • Single mode: ≥95%.
  • Photometric mode: ≥90%.
  • Response time: From t10 to t90 in less than 3 seconds.
  • CPC sample flow: 0,3 L/min
  • Data logging: With GRIMM 5475 software to PC, USB flash drive or via USB/RS-232 connections.
  • Power requirements: 110-240 VAC; 50/60 Hz; maximum 130 W.
  • Dimensions: 19″, 22 x 48 x 41 cm.
  • Weight: 16,2 kg.

Applications

  • Regulatory monitoring, for example, government networks.
  • Suitable for use in ACTRIS.
  • Fundamental Aerosol Research.
  • Research on environmental aerosols.
  • Monitoring of nanotechnological processes.
  • Studies on atmospheric nucleation.
  • Transport of nanoparticles.

We manufacture, maintain and repair environmental instrumentation equipment.
CONTACT

Other products

Manufacturing, maintenance and repair of environmental instrumentation equipment.

ALL PRODUCTS
Sequential Low Volume Sampler for sampling up to 30 filters
Sequential Low Volume Sampler for gravimetric determination of the mass concentration of PM10 or PM2,5 of suspended particulate matter, with sample collection on a filter and determination in the laboratory.
Sequential high volume sampler for sampling up to 15 filters
Sequential high volume sampler for gravimetric determination of the mass concentration of PM10 or PM2,5 of suspended particulate matter, with sample collection on a filter and determination in the laboratory.
High-volume sampler for sampling a filter
High volume sampler with 1 filter for gravimetric determination of the mass concentration of PM10 or PM2,5 of suspended particulate matter, with sample collection on a filter and determination in the laboratory
Low volume sampler for sampling a filter
Low volume sampler with 1 filter for gravimetric determination of the mass concentration of PM10 or PM2,5 of suspended particulate matter, with sample collection on a filter and determination in the laboratory
Continuous particle monitor
Latest generation optical aerosol spectrometer with unique detection limit and excellent counting efficiency. Suitable for real-time monitoring of PM in any environmental condition and at all sites
Ultrafine particle counter and sizer
The 19" rack-mount SMPS+C system, fully compliant with CEN/TS 17434:2020, is designed for continuous (24/7) real-time monitoring of ultrafine particles (UFP) in ambient air. Its functionality is based on electrostatic classification and condensation particle counting
Continuous Particle Monitor
The GRIMM EDM 180 is the leading system for measuring particle concentration (PM10, PM2,5) in ambient air
Rainwater sampler
Precipitation collector for collecting rain for chemical analysis. It is protected in a reinforced and thermally insulated cabinet to withstand adverse outdoor conditions and keep the sample in good condition
Sedimentable Particle Sampler
Sampler equipment for determining sedimentable particles present in the air and which are deposited by gravity inside the sample collection container
Small volume sampler for daily sampling with Temperature and Pressure sensor
Equipment for capturing SO2 and smoke in immission for daily sampling periods with temperature and pressure sensor.
Contacte