• +34 93 777 05 00
  • mcv@mcvsa.com
contact

Sequential high volume sampler for sampling up to 15 filters

Sequential high volume sampler for gravimetric determination of the mass concentration of PM10 or PM2,5 of suspended particulate matter, with sample collection on a filter and determination in the laboratory. It has a capacity of up to 15 filters.

Característiques tècniques

  • Nominal flow rate: adjustable from 15 to 40 m³/h.
  • Filter capacity: 15 filters with a diameter of 150 mm.
  • Measurement of temperature, humidity and atmospheric pressure.
  • Flow rate uncertainty:
    • ≤ 2,0% of the nominal flow rate during the sampling period.
    • ≤ 5,0% of the nominal flow rate (instantaneous flow rate).
  • Selection of mass or volumetric reading.
  • Visualization of operative eyelids.
  • Programming of sampling parameters, periods and sequences.
  • Suitable for working outdoors, in polyester-fiber box.
  • Communication channel: RS232.
  • Power supply: 220V/50Hz.
  • Dimensions: 1150x750x600 mm.
  • Weight: 62 Kg (without head).
  • EN 12341 and EN 14907 Standards.

Aplicacions

  • Suspended particles collection PM10, PM2,5, PM1 or TSP.
  • Installation and operation in urban and background air quality networks.
  • Follow-up and operation in industrial plants.
  • Follow-up of works by inspection entities.
  • Study and follow-up of atmospheric episodes of industrial air quality, Saharan dust intrusions, mist episodes or pollination.
  • Scientific research campaigns.
  • Aerobiological studies.

Accessoris

  • PM10 head
  • PM2,5 Head
  • PM1 head
  • Total particle head
  • Foam block container
  • Container
  • Filter holder- 15 cm
  • Cabin mounting kit

Fabriquem, manteniment i reparació d'equips d’instrumentació mediambiental
CONTACTAR

Altres productes

Fabricació, manteniment i reparació d’equips d’instrumentació mediambiental.

TOTS ELS PRODUCTES
Sequential Low Volume Sampler for sampling up to 30 filters
Sequential Low Volume Sampler for gravimetric determination of the mass concentration of PM10 or PM2,5 of suspended particulate matter, with sample collection on a filter and determination in the laboratory.
High-volume sampler for sampling a filter
High volume sampler with 1 filter for gravimetric determination of the mass concentration of PM10 or PM2,5 of suspended particulate matter, with sample collection on a filter and determination in the laboratory
Low volume sampler for sampling a filter
Low volume sampler with 1 filter for gravimetric determination of the mass concentration of PM10 or PM2,5 of suspended particulate matter, with sample collection on a filter and determination in the laboratory
Continuous particle monitor
Latest generation optical aerosol spectrometer with unique detection limit and excellent counting efficiency. Suitable for real-time monitoring of PM in any environmental condition and at all sites
Ultrafine particle counter
The 19" rack-mount CPC with a 10nm D50, fully compliant with EN16976, is designed for continuous (24/7) real-time monitoring of ultrafine particles (UFP) in ambient air
Ultrafine particle counter and sizer
The 19" rack-mount SMPS+C system, fully compliant with CEN/TS 17434:2020, is designed for continuous (24/7) real-time monitoring of ultrafine particles (UFP) in ambient air. Its functionality is based on electrostatic classification and condensation particle counting
Continuous Particle Monitor
The GRIMM EDM 180 is the leading system for measuring particle concentration (PM10, PM2,5) in ambient air
Rainwater sampler
Precipitation collector for collecting rain for chemical analysis. It is protected in a reinforced and thermally insulated cabinet to withstand adverse outdoor conditions and keep the sample in good condition
Sedimentable Particle Sampler
Sampler equipment for determining sedimentable particles present in the air and which are deposited by gravity inside the sample collection container
Small volume sampler for daily sampling with Temperature and Pressure sensor
Equipment for capturing SO2 and smoke in immission for daily sampling periods with temperature and pressure sensor.
Contacte